Bomber
Gear
A New Ride
Posts: 4,758
|
Post by Bomber on Jun 24, 2011 19:12:33 GMT
That was so funny Charlie. Excellent work again mate, is there much more tin work to do? The engine fits nice but it still looks a tall engine to me did the sump mod work Ok. Thank god for engine hosts I remember standing on the wings with a rope aound my neck and back lifting an engine and gearbox in to a 100e at that angle
Jack is going to be a very lucky lad
Cheers Bomber
|
|
Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Jun 24, 2011 21:04:24 GMT
We have a little bit around the boot lid seal and of coarse the bulk head/tunnel..... Jack is lucky but woe be tied if he don't look after it and wash/polish it regularly.....I aint got a problem with him driving the wheels off it and will teach him how to control a rear wheel drive car PROPERLY... But there will be a throttle stop fitted for when am not about.... Cheers Marcus.....
|
|
|
Post by tbolt64 on Jun 25, 2011 6:25:35 GMT
If Jack is anything like my younger brother and nephew when they passed their driving tests (or for that matter any of us !) there will be only two speeds - flat out and stop
|
|
|
Post by Flufelix on Jun 25, 2011 6:38:20 GMT
If Jack is anything like my younger brother and nephew when they passed their driving tests (or for that matter any of us !) there will be only two speeds - flat out and stop If Jacks anything like his dad it will cost us more in petrol than anything ask Marcus how much you use just on the driveway. It's coming on great only 20 months and 5 days left :-)
|
|
Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Mar 17, 2012 19:39:09 GMT
|
|
|
Post by Roland Rat Rod on Mar 17, 2012 19:54:07 GMT
Hey buddy glad to see your back in the swing, neat fit I dont think I have seen a K series in a 100E before, I know Chris with Rebel Pop has put a Peugeot pick truck 1.9 in his with the G box etc.
|
|
Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Mar 17, 2012 20:00:38 GMT
|
|
|
Post by v6100e on Mar 17, 2012 20:05:45 GMT
looking good.
|
|
Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Mar 22, 2012 21:24:51 GMT
Tuesday I managed to get the gearbox mounting finished and welded into place.... Cheers Marcus
|
|
Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Mar 22, 2012 22:02:06 GMT
|
|