Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Jan 31, 2015 19:50:05 GMT
OOOOOO Shiny Bits..... So have you written a to do list in the right order? What's next on the agenda? Have you offered the front cross member up yet?
|
|
|
Post by FlashCadillac on Jan 31, 2015 20:16:46 GMT
OOOOOO Shiny Bits..... So have you written a to do list in the right order? What's next on the agenda? Have you offered the front cross member up yet? List? No... But cross member first. The cross member doesnt fit between then rails, but it isnt meant to yet. I have to do some marking out on the chassis first... But i might get it blasted first. Waiting for your opinion next weekend
|
|
Petrolhead71
Administrator
Start Your Engines....
Posts: 3,817
|
Post by Petrolhead71 on Jan 31, 2015 21:36:11 GMT
So if it doesn't fit between the rails, does it sit on top? or underneath?
Is it wider so that the wishbones don't need to be massively wide...
|
|
|
Post by FlashCadillac on Jan 31, 2015 21:52:01 GMT
It will sit between the rails, but you have to cut a half inch outwards noch in both rails once you work out your wheel centre.
I dont know if this is for strength (as you weld it in then box up to it, rather than box the chassis first) or because it keeps the right geometry for the A-Arms.
I imagine it might be the same crossmember for all the trucks they sell a kit for, As you have to notch the chassis on all of them.
|
|
|
Post by FlashCadillac on Feb 15, 2015 17:33:26 GMT
|
|
|
Post by Whole Lotta Rosé on Feb 18, 2015 19:17:20 GMT
Guess that's just another truck that will be sold in bits then!
|
|
|
Post by tbolt64 on Feb 20, 2015 7:44:06 GMT
Oh ye of little faith............... you have to realise it's all part of a grand plan to achieve the end result - another car/truck to run around in - just till this one's finished of course, and so the cycle goes on................
|
|
|
Post by Sign of the Zodiac on Mar 15, 2015 20:58:01 GMT
Looking good Mark. Really like shiny stuff
|
|
|
Post by FlashCadillac on May 2, 2015 15:57:13 GMT
|
|
|
Post by FlashCadillac on May 2, 2015 16:01:15 GMT
|
|